Proven Video Transport for an HD World

HomeCompanyProductsLiterature & SupportNews & EventsContact us
MD8000
MD2000
HD-GigE
MD-101 Series
HD270 Coax
MD-003 1RU
MD-003 3RU
MD-003STM
MD-2U-4001
MD-2U-4002
MD-003ETH
MD-003GETR
MD-003VidMod
MD6000

MD-003
GETR

4 Port Gigabit Ethernet Switch with Optical Uplink

features:
  • Video-Aware Layer 2 Switch
  • Fiber Optic Transport Interface
  • Automatic Video Signal Prioritization
  • Bandwidth Released for Data Traffi c
  • Supports One-Way Multicast
functions:
  • Intelligently Combines Multiple GigE Inputs
  • Direct Optical Connection to IP Routers
  • Interchangeable SFP Optics
  • Rate Limiting on Each Port in 1 Mbps steps
applications:
  • Uncompressed Video Transport
  • Local Venue Access Links
  • Studio to Transmitter Links
  • Metro-area Networking
  • Long-Haul Network Access
datasheet:
Image  

Combine Multiple Gigabit Ethernet Signals Over Fiber for Video and Data Transport



Description

The MD-003 GETR 4-Port Gigabit Ethernet Transceiver provides a cost effective, robust single card solution for converged broadcast network needs. This video-aware, layer 2 Ethernet switch manages bandwidth for multiple input ports, allowing a single high speed optical Gigabit Ethernet link to be intelligently managed. Video signals are given priority whenever they are active, while data can be transported on the remaining bandwidth. When the video signals are removed, data bandwidth is automatically increased.

The GETR provides non-blocking, wire speed port aggregation that combines 4 standard Gigabit Ethernet interfaces and one optional 10/100 RJ45 interface into a single optical interface. The bandwidth on each port can be controlled in 1 Mbps increments.

Two modes of operation can be configured; “VLAN mode” and “PORT mode.” In VLAN mode, priority can be assigned to video traffic and provide provisioned bandwidth for specific VLAN Groups with Guaranteed QoS while other traffic is best effort. In PORT mode, video traffic is assigned priority based on port order from 1-4. In each mode, non-video traffic speeds up to full bandwidth when video is not present at the input.

Industry standard SFP optics are used in the optical transceiver port to support common sparing with other fiber transport equipment. The optical port can also be rate-limited to ensure compatibility with carrier service level agreements.

In addition to the E-TXRX/E-RXTX modules, the MD-003 series includes and STM-1/OC3 transmitter and receiver along with a universal video interface card that supports HD-SDI, SD-SDI, SDTI and DVB/ASI video signals.

Media Links’ HD-GigE compression codecs can be used with the GETRin the MD-003 carrier-class 1RU shelf to provide a compact, cost effective multi-service IP transport solution.

The MD-003 GETR is ideal for HD, SD, DVB-ASI video transport over IPnetworks as well as shared use with file transfer, VOIP, Internet access and other IP applications. Combining multiple IP services onto a single fiber reduces the need for remote switches on the network and uses fewer ports on core IP routers.

Specifications

System Specifications

System Specifications
LAN Protocals IEEE 802.1p QoS
  IEEE 802.1ad Link Aggregation (port trunking)
  IEEE 802.3q VLAN Table with 32 entries and 4 priority levels
MAC Performance Packet Buffer 1Mb minimum
  Jumbo Frame support
  Port based ingress/egress rate control in 1Mbps steps
  Wire-Speed Port Aggregation
  Static or Automatic learning and aging MAC entries
  MAC table with 8 static entries per port
  8 static Multicast addresses per port
  Port Flow Control with Enable/Disable and Loopback
Maintenance Port RJ-45 for Command Line Interface on Front of Card
  RS-232, 9600 baud, Odd ParityPhysical
Signal Interface MD-003-GETR1-1 MD-003-GETR1-2
Rear Panel Connectors 4 x RJ-45 5 x RJ-45
Signal Format 1000BASE-T (IEEE 802.3ab Gigabit Ethernet) Adds single 100BASE-TX port for Control
Data Rate 1000 Mbps 4x1000 Mbps, 1x100 Mbps
Maximum Cable Length 100 m 100 m
Optical Interface MD-003-GETR1-1 MD-003-GETR1-2
Signal Format IEEE 802.3z Gigabit Ethernet IEEE 802.3z Gigabit Ethernet
  1000BASE-LX 1000BASE-LX
Data Rate 1250 Mbps 1250 Mbps
Transmit Power Optical Parameters dependent on choice of SFP see Model Information table below
Receiver Input Range Optical Parameters dependent on choice of SFP see Model Information table below
Physical
Power Consumption <25 watts <25 watts
Size 3 RU module – occupies single chassis slot 3 RU module – occupies dual chassis slot
Operating Temperature Range +0°C to +55°C +0°C to +55°C

Ordering

Ordering Information

Base Unit
Model Number Description
MD-003-GETR1-1 Single Slot Gigabit Ethernet Transceiver for 1RU with 4 x RJ-45
MD-003-GETR1-2 Dual Slot Gigabit Ethernet Transceiver for 1RU with 5 x RJ-45
Optical Plug-ins (SFP)
Model Number Optical TX (dBm)/ Optical RX (dBm)/ Wavelength (nm)/ Distance
SFP1310-1G10 -3.0>Po>-9.0/ -3.0>Pin>-20.0/ 1274<λ<1360/ ~10km
SFP1310-1G40 0.0>Po>-4.5/ -3.0>Pin>-22.5/ 1280<λ<1335/ ~40km
SFP1550-1G72 +3.0>Po>-2.0/ -3.0>Pin>-24.0/ 1500<λ<1580/ ~72km

Note: Each MD-003-GETR must be ordered with one Optical Plug-in (SFP) module from above list.

All specifications are subject to change without notice by Media Links. HD270 Coax, HD-GigE, MD-003, MD2000, MD6000, MD6100R, MD-003STM, MD-003VidMod, MD-2U-4001, MD-2U-4002, MD-003ETH, and MD-003GETR are trademarks of Media LInks Inc.